Current Position:首页 > Products > Desolventizing

Mixed oil evaporation and stripping

TIME:2014-10-23 11:14:02FROM: AUTHOR:
Mixed oil evaporation and stripping:
(1)Process of the blended oil in the evaporation and stripping
Mixed oil filter → mixed oil tank → first evapo...

 

Mixed oil evaporation and stripping:
(1)Process of the blended oil in the evaporation and stripping
Mixed oil filter mixed oil tank first evaporator → second evaporator → stripper → leaching crude oil
Pump from leaching out of the mixture of oil, grease and solvents must be treated to make the separation. The boiling point of the separation method is the use of various oils with a solvent, mixing the first oil heating evaporation, most of the solvent is separated from the vaporized grease. Then, using different oil and volatile solvent, the concentrated mixture of oil by steam distillation and the residual crude oil in the solvent distilled off to obtain a very low amount of the solvent containing extracted crude oil, but during the evaporation, before stripping , shall be mixed oil "preprocessing" to remove the end of one of the solid meal and colloidal substances, ingredients are mixed to create conditions for oil separation.

                    负压蒸发整2.jpg
(2) Mixed oil evaporation and stripping: oil mixture through a filter so that the filter medium, which contained solid meal incurs late interception, get relatively clean mix oil. The level transition process a large amount of leaching is, in the first set of oil grid
equipped tent filters, filter specifications for 100 mesh, concentrated mixture of oil through a filter and then pumped out.